Energy Savings Using Coatings TecHNOLOGY
ThermaCoat-400 Temperature Reduction
ThermaCoat-400 Temperature Reduction
ThermaCoat-400 Temperature Reduction
ThermaCoat-400 reduce the surface temperature by 13% to 37% and reduce the amount of energy consumed.
Surface Temperature drops 13% - 37%
ThermaCoat-400 Temperature Reduction
ThermaCoat-400 Temperature Reduction
ThermaCoat product has an excellent thermal insulation properties over wide temperature range (80 - 400F) with its low conductivity (0.017 - 0.022 mW/mk)
Energy Savings on Boiler Pipes
Indonesia team sees temperatures decrease of 10C in The Million Cool Roofs Challenge
Indonesia team sees temperatures decrease of 10C in The Million Cool Roofs Challenge
ThermaCoat-300 and 400 are ideal for coating pipes, valves and tanks; its thermal properties minimize heat loss.
➤ Energy savings
Indonesia team sees temperatures decrease of 10C in The Million Cool Roofs Challenge
Indonesia team sees temperatures decrease of 10C in The Million Cool Roofs Challenge
Indonesia team sees temperatures decrease of 10C in The Million Cool Roofs Challenge
Mayora Group, Indonesia applied MS-Thermashield to their roof to reduce the interior temperature by 10C
RETROFIT WITH insulated Coatings for energy efficiency
AAKSEN STUDIO
Corrugated Metal Building vs High Tech Materials
Corrugated Metal Building vs High Tech Materials
Our team worked with AAKSEN Architecture Consultant to design and perform a study on the effectiveness of our coatings in comparison to some of the new wall technologies
Corrugated Metal Building vs High Tech Materials
Corrugated Metal Building vs High Tech Materials
Corrugated Metal Building vs High Tech Materials
Two building were constructed: the first was made out of corrugated zinc metal and the second were constructed using a combination of different high tech materials
High Tech Materials vs Corrugated Metal Building with our coatings
Coating performs as well as new high tech constrcutions. Retrofit with ThermaCoat and MS-Thermashiel
Coating performs as well as new high tech constrcutions. Retrofit with ThermaCoat and MS-Thermashiel
The surface temperature is taken on each one of the materials to compare performance
Coating performs as well as new high tech constrcutions. Retrofit with ThermaCoat and MS-Thermashiel
Coating performs as well as new high tech constrcutions. Retrofit with ThermaCoat and MS-Thermashiel
Coating performs as well as new high tech constrcutions. Retrofit with ThermaCoat and MS-Thermashiel
The corrugated metal building's interior temp of 32.5C while the high-tech building's interior temp is 32.4C. Our coating on metal building is equivalent in performance to a newly constructed building using the highest construction technology at a fraction of a cost.
Insulation performance on roof tiles
Temperature test
Temperature Profile-Control Sample
Temperature Profile-Control Sample
Clearcoat with our ACV microspheres was tested against a control without our ACV Microspheres
Temperature Profile-Control Sample
Temperature Profile-Control Sample
Temperature Profile-Control Sample
The average attic temperature of the control sample 7.3F lower than the roof surface temperature. But after 1 1/2 hour exposed to a heat source the attic temperature became hotter than the surface temperature. This will require the cooling source to spend more energy maintaining the interior temperature.
Temperature Profile-Test Sample
Temperature Profile-Control Sample
Temperature Profile-Test Sample
The average temperature of the test sample maintained an average 15.5F lower than the roof surface temperature. The sample blocked the energy transfer and did allow the attic temperature to be higher than the roof surface temperature.